flag_de flag_fr

    
 
Novotegra_Icon_Trapez 0000034063-12532

MHHnovotegra for Trapezoidal Metal Roofs

Elevated Installation


In an elevated configuration on a trapezoidal sheet metal roof, the base rail is mounted directly onto the roofing with self-drilling screws. The optimal configuration is achieved when the base rails run across multiple seams; this ensures the equal distribution of weight on the roof. We offer five different lengths of module supports depending on the desired angle of elevation for your modules. This enables even modules installed on a north facing roof to be configured facing the southern sky. The specially designed module anchors are attached directly to the module frames. To mount the modules, the module anchors are simply layed into the base rail and the module supports are attched to the elevated edge of the module frame. Each module support has ten centimetres of threading so that the angle of the modules can be fine-tuned.

Because the MHHnovotegra system is modularly designed, installations on east or west facing roofs are also possible. The MHHnovotegra C-rail can also be combined with the new elevated installation system in a variety of different configurations.

 

 

Roof Parallel Installation

 

In a roof parallel configuration, the C-rail is attached directly to the roof surface with our mounting set. The roof remains water tight thanks to the included sealing washers and optional EPDM-strips. In an optimal layout, the upper and lower rails are installed in a staggered configuration along the seams: this ensures an evenly distributed load on the roof as well as creating enough space behind the moduls for ventilation.

 

Thanks to proven MHH clamp technology, modules can be quickly and safely mounted

onto the railing. The underconstruction of the mounting system is almost completely hidden by our end clamps, which connect the module flush with the end of the C-rail—creating a symmetrical and asthetic module array.

 

 

Advantages

  1. Very lightweight and durable
  2. Quick and easy installation
  3. Outstanding price-performance ratio
  4. Secure connection to roof surface across multiple seams, even when under extreme load conditions
  5. Modules can be installed parallel to the roof or at an angle between 13° and 40° from the roof surface
  6. System can also be installed on eastwest facing roofs
  7. Material saving design with no triangle supports or cross rails needed
  8. Pre-configured fasteners for quick installation
  9. Easy layout to DIN 1055 regulations
  10. 10 year product guarantee

 

 

Datasheets

 

icon MHHnovotegra for Trapezoidal Metal Roofs: MHH Datasheet

 

 

 

 

 

Diese E-Mail-Adresse ist gegen Spambots geschützt! Sie müssen JavaScript aktivieren, damit Sie sie sehen können.

 

Admin Frontend Login